Buy the 'Forex Factory News EA' Trading Robot (Expert ...

Trading economic news

The majority of this sub is focused on technical analysis. I regularly ridicule such "tea leaf readers" and advocate for trading based on fundamentals and economic news instead, so I figured I should take the time to write up something on how exactly you can trade economic news releases.
This post is long as balls so I won't be upset if you get bored and go back to your drooping dick patterns or whatever.

How economic news is released

First, it helps to know how economic news is compiled and released. Let's take Initial Jobless Claims, the number of initial claims for unemployment benefits around the United States from Sunday through Saturday. Initial in this context means the first claim for benefits made by an individual during a particular stretch of unemployment. The Initial Jobless Claims figure appears in the Department of Labor's Unemployment Insurance Weekly Claims Report, which compiles information from all of the per-state departments that report to the DOL during the week. A typical number is between 100k and 250k and it can vary quite significantly week-to-week.
The Unemployment Insurance Weekly Claims Report contains data that lags 5 days behind. For example, the Report issued on Thursday March 26th 2020 contained data about the week ending on Saturday March 21st 2020.
In the days leading up to the Report, financial companies will survey economists and run complicated mathematical models to forecast the upcoming Initial Jobless Claims figure. The results of surveyed experts is called the "consensus"; specific companies, experts, and websites will also provide their own forecasts. Different companies will release different consensuses. Usually they are pretty close (within 2-3k), but for last week's record-high Initial Jobless Claims the reported consensuses varied by up to 1M! In other words, there was essentially no consensus.
The Unemployment Insurance Weekly Claims Report is released each Thursday morning at exactly 8:30 AM ET. (On Thanksgiving the Report is released on Wednesday instead.) Media representatives gather at the Frances Perkins Building in Washington DC and are admitted to the "lockup" at 8:00 AM ET. In order to be admitted to the lockup you have to be a credentialed member of a media organization that has signed the DOL lockup agreement. The lockup room is small so there is a limited number of spots.
No phones are allowed. Reporters bring their laptops and connect to a local network; there is a master switch on the wall that prevents/enables Internet connectivity on this network. Once the doors are closed the Unemployment Insurance Weekly Claims Report is distributed, with a heading that announces it is "embargoed" (not to be released) prior to 8:30 AM. Reporters type up their analyses of the report, including extracting key figures like Initial Jobless Claims. They load their write-ups into their companies' software, which prepares to send it out as soon as Internet is enabled. At 8:30 AM the DOL representative in the room flips the wall switch and all of the laptops are connected to the Internet, releasing their write-ups to their companies and on to their companies' partners.
Many of those media companies have externally accessible APIs for distributing news. Media aggregators and squawk services (like RanSquawk and TradeTheNews) subscribe to all of these different APIs and then redistribute the key economic figures from the Report to their own subscribers within one second after Internet is enabled in the DOL lockup.
Some squawk services are text-based while others are audio-based. FinancialJuice.com provides a free audio squawk service; internally they have a paid subscription to a professional squawk service and they simply read out the latest headlines to their own listeners, subsidized by ads on the site. I've been using it for 4 months now and have been pretty happy. It usually lags behind the official release times by 1-2 seconds and occasionally they verbally flub the numbers or stutter and have to repeat, but you can't beat the price!
Important - I’m not affiliated with FinancialJuice and I’m not advocating that you use them over any other squawk. If you use them and they misspeak a number and you lose all your money don’t blame me. If anybody has any other free alternatives please share them!

How the news affects forex markets

Institutional forex traders subscribe to these squawk services and use custom software to consume the emerging data programmatically and then automatically initiate trades based on the perceived change to the fundamentals that the figures represent.
It's important to note that every institution will have "priced in" their own forecasted figures well in advance of an actual news release. Forecasts and consensuses all come out at different times in the days leading up to a news release, so by the time the news drops everybody is really only looking for an unexpected result. You can't really know what any given institution expects the value to be, but unless someone has inside information you can pretty much assume that the market has collectively priced in the experts' consensus. When the news comes out, institutions will trade based on the difference between the actual and their forecast.
Sometimes the news reflects a real change to the fundamentals with an economic effect that will change the demand for a currency, like an interest rate decision. However, in the case of the Initial Jobless Claims figure, which is a backwards-looking metric, trading is really just self-fulfilling speculation that market participants will buy dollars when unemployment is low and sell dollars when unemployment is high. Generally speaking, news that reflects a real economic shift has a bigger effect than news that only matters to speculators.
Massive and extremely fast news-based trades happen within tenths of a second on the ECNs on which institutional traders are participants. Over the next few seconds the resulting price changes trickle down to retail traders. Some economic news, like Non Farm Payroll Employment, has an effect that can last minutes to hours as "slow money" follows behind on the trend created by the "fast money". Other news, like Initial Jobless Claims, has a short impact that trails off within a couple minutes and is subsequently dwarfed by the usual pseudorandom movements in the market.
The bigger the difference between actual and consensus, the bigger the effect on any given currency pair. Since economic news releases generally relate to a single currency, the biggest and most easily predicted effects are seen on pairs where one currency is directly effected and the other is not affected at all. Personally I trade USD/JPY because the time difference between the US and Japan ensures that no news will be coming out of Japan at the same time that economic news is being released in the US.
Before deciding to trade any particular news release you should measure the historical correlation between the release (specifically, the difference between actual and consensus) and the resulting short-term change in the currency pair. Historical data for various news releases (along with historical consensus data) is readily available. You can pay to get it exported into Excel or whatever, or you can scroll through it for free on websites like TradingEconomics.com.
Let's look at two examples: Initial Jobless Claims and Non Farm Payroll Employment (NFP). I collected historical consensuses and actuals for these releases from January 2018 through the present, measured the "surprise" difference for each, and then correlated that to short-term changes in USD/JPY at the time of release using 5 second candles.
I omitted any releases that occurred simultaneously as another major release. For example, occasionally the monthly Initial Jobless Claims comes out at the exact same time as the monthly Balance of Trade figure, which is a more significant economic indicator and can be expected to dwarf the effect of the Unemployment Insurance Weekly Claims Report.
USD/JPY correlation with Initial Jobless Claims (2018 - present)
USD/JPY correlation with Non Farm Payrolls (2018 - present)
The horizontal axes on these charts is the duration (in seconds) after the news release over which correlation was calculated. The vertical axis is the Pearson correlation coefficient: +1 means that the change in USD/JPY over that duration was perfectly linearly correlated to the "surprise" in the releases; -1 means that the change in USD/JPY was perfectly linearly correlated but in the opposite direction, and 0 means that there is no correlation at all.
For Initial Jobless Claims you can see that for the first 30 seconds USD/JPY is strongly negatively correlated with the difference between consensus and actual jobless claims. That is, fewer-than-forecast jobless claims (fewer newly unemployed people than expected) strengthens the dollar and greater-than-forecast jobless claims (more newly unemployed people than expected) weakens the dollar. Correlation then trails off and changes to a moderate/weak positive correlation. I interpret this as algorithms "buying the dip" and vice versa, but I don't know for sure. From this chart it appears that you could profit by opening a trade for 15 seconds (duration with strongest correlation) that is long USD/JPY when Initial Jobless Claims is lower than the consensus and short USD/JPY when Initial Jobless Claims is higher than expected.
The chart for Non Farm Payroll looks very different. Correlation is positive (higher-than-expected payrolls strengthen the dollar and lower-than-expected payrolls weaken the dollar) and peaks at around 45 seconds, then slowly decreases as time goes on. This implies that price changes due to NFP are quite significant relative to background noise and "stick" even as normal fluctuations pick back up.
I wanted to show an example of what the USD/JPY S5 chart looks like when an "uncontested" (no other major simultaneously news release) Initial Jobless Claims and NFP drops, but unfortunately my broker's charts only go back a week. (I can pull historical data going back years through the API but to make it into a pretty chart would be a bit of work.) If anybody can get a 5-second chart of USD/JPY at March 19, 2020, UTC 12:30 and/or at February 7, 2020, UTC 13:30 let me know and I'll add it here.

Backtesting

So without too much effort we determined that (1) USD/JPY is strongly negatively correlated with the Initial Jobless Claims figure for the first 15 seconds after the release of the Unemployment Insurance Weekly Claims Report (when no other major news is being released) and also that (2) USD/JPY is strongly positively correlated with the Non Farms Payroll figure for the first 45 seconds after the release of the Employment Situation report.
Before you can assume you can profit off the news you have to backtest and consider three important parameters.
Entry speed: How quickly can you realistically enter the trade? The correlation performed above was measured from the exact moment the news was released, but realistically if you've got your finger on the trigger and your ear to the squawk it will take a few seconds to hit "Buy" or "Sell" and confirm. If 90% of the price move happens in the first second you're SOL. For back-testing purposes I assume a 5 second delay. In practice I use custom software that opens a trade with one click, and I can reliably enter a trade within 2-3 seconds after the news drops, using the FinancialJuice free squawk.
Minimum surprise: Should you trade every release or can you do better by only trading those with a big enough "surprise" factor? Backtesting will tell you whether being more selective is better long-term or not.
Hold time: The optimal time to hold the trade is not necessarily the same as the time of maximum correlation. That's a good starting point but it's not necessarily the best number. Backtesting each possible hold time will let you find the best one.
The spread: When you're only holding a position open for 30 seconds, the spread will kill you. The correlations performed above used the midpoint price, but in reality you have to buy at the ask and sell at the bid. Brokers aren't stupid and the moment volume on the ECN jumps they will widen the spread for their retail customers. The only way to determine if the news-driven price movements reliably overcome the spread is to backtest.
Stops: Personally I don't use stops, neither take-profit nor stop-loss, since I'm automatically closing the trade after a fixed (and very short) amount of time. Additionally, brokers have a minimum stop distance; the profits from scalping the news are so slim that even the nearest stops they allow will generally not get triggered.
I backtested trading these two news releases (since 2018), using a 5 second entry delay, real historical spreads, and no stops, cycling through different "surprise" thresholds and hold times to find the combination that returns the highest net profit. It's important to maximize net profit, not expected value per trade, so you don't over-optimize and reduce the total number of trades taken to one single profitable trade. If you want to get fancy you can set up a custom metric that combines number of trades, expected value, and drawdown into a single score to be maximized.
For the Initial Jobless Claims figure I found that the best combination is to hold trades open for 25 seconds (that is, open at 5 seconds elapsed and hold until 30 seconds elapsed) and only trade when the difference between consensus and actual is 7k or higher. That leads to 30 trades taken since 2018 and an expected return of... drumroll please... -0.0093 yen per unit per trade.
Yep, that's a loss of approx. $8.63 per lot.
Disappointing right? That's the spread and that's why you have to backtest. Even though the release of the Unemployment Insurance Weekly Claims Report has a strong correlation with movement in USD/JPY, it's simply not something that a retail trader can profit from.
Let's turn to the NFP. There I found that the best combination is to hold trades open for 75 seconds (that is, open at 5 seconds elapsed and hold until 80 seconds elapsed) and trade every single NFP (no minimum "surprise" threshold). That leads to 20 trades taken since 2018 and an expected return of... drumroll please... +0.1306 yen per unit per trade.
That's a profit of approx. $121.25 per lot. Not bad for 75 seconds of work! That's a +6% ROI at 50x leverage.

Make it real

If you want to do this for realsies, you need to run these numbers for all of the major economic news releases. Markit Manufacturing PMI, Factory Orders MoM, Trade Balance, PPI MoM, Export and Import Prices, Michigan Consumer Sentiment, Retail Sales MoM, Industrial Production MoM, you get the idea. You keep a list of all of the releases you want to trade, when they are released, and the ideal hold time and "surprise" threshold. A few minutes before the prescribed release time you open up your broker's software, turn on your squawk, maybe jot a few notes about consensuses and model forecasts, and get your finger on the button. At the moment you hear the release you open the trade in the correct direction, hold it (without looking at the chart!) for the required amount of time, then close it and go on with your day.
Some benefits of trading this way: * Most major economic releases come out at either 8:30 AM ET or 10:00 AM ET, and then you're done for the day. * It's easily backtestable. You can look back at the numbers and see exactly what to expect your return to be. * It's fun! Packing your trading into 30 seconds and knowing that institutions are moving billions of dollars around as fast as they can based on the exact same news you just read is thrilling. * You can wow your friends by saying things like "The St. Louis Fed had some interesting remarks on consumer spending in the latest Beige Book." * No crayons involved.
Some downsides: * It's tricky to be fast enough without writing custom software. Some broker software is very slow and requires multiple dialog boxes before a position is opened, which won't cut it. * The profits are very slim, you're not going to impress your instagram followers to join your expensive trade copying service with your 30-second twice-weekly trades. * Any friends you might wow with your boring-ass economic talking points are themselves the most boring people in the world.
I hope you enjoyed this long as fuck post and you give trading economic news a try!
submitted by thicc_dads_club to Forex [link] [comments]

MAME 0.215

MAME 0.215

A wild MAME 0.215 appears! Yes, another month has gone by, and it’s time to check out what’s new. On the arcade side, Taito’s incredibly rare 4-screen top-down racer Super Dead Heat is now playable! Joining its ranks are other rarities, such as the European release of Capcom‘s 19XX: The War Against Destiny, and a bootleg of Jaleco’s P-47 – The Freedom Fighter using a different sound system. We’ve got three newly supported Game & Watch titles: Lion, Manhole, and Spitball Sparky, as well as the crystal screen version of Super Mario Bros. Two new JAKKS Pacific TV games, Capcom 3-in-1 and Disney Princesses, have also been added.
Other improvements include several more protection microcontrollers dumped and emulated, the NCR Decision Mate V working (now including hard disk controllers), graphics fixes for the 68k-based SNK and Alpha Denshi games, and some graphical updates to the Super A'Can driver.
We’ve updated bgfx, adding preliminary Vulkan support. There are some issues we’re aware of, so if you run into issues, check our GitHub issues page to see if it’s already known, and report it if it isn’t. We’ve also improved support for building and running on Linux systems without X11.
You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to emulation [link] [comments]

MAME 0.214

MAME 0.214

With the end of September almost here, it’s time to see what goodies MAME 0.214 delivers. This month, we’ve got support for five more Nintendo Game & Watch titles (Fire, Flagman, Helmet, Judge and Vermin), four Chinese computers from the 1980s, and three Motorola CPU evaluation kits. Cassette support has been added or fixed for a number of systems, the Dragon Speech Synthesis module has been emulated, and the Dragon Sound Extension module has been fixed. Acorn Archimedes video, sound and joystick support has been greatly improved.
On the arcade side, remaining issues in Capcom CPS-3 video emulation have been resolved and CD images have been upgraded to CHD version 5, Sega versus cabinet billboard support has been added to relevant games, and long-standing issues with music tempo in Data East games have been worked around.
Of course, you can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to emulation [link] [comments]

MAME 0.215

MAME 0.215

A wild MAME 0.215 appears! Yes, another month has gone by, and it’s time to check out what’s new. On the arcade side, Taito’s incredibly rare 4-screen top-down racer Super Dead Heat is now playable! Joining its ranks are other rarities, such as the European release of Capcom‘s 19XX: The War Against Destiny, and a bootleg of Jaleco’s P-47 – The Freedom Fighter using a different sound system. We’ve got three newly supported Game & Watch titles: Lion, Manhole, and Spitball Sparky, as well as the crystal screen version of Super Mario Bros. Two new JAKKS Pacific TV games, Capcom 3-in-1 and Disney Princesses, have also been added.
Other improvements include several more protection microcontrollers dumped and emulated, the NCR Decision Mate V working (now including hard disk controllers), graphics fixes for the 68k-based SNK and Alpha Denshi games, and some graphical updates to the Super A'Can driver.
We’ve updated bgfx, adding preliminary Vulkan support. There are some issues we’re aware of, so if you run into issues, check our GitHub issues page to see if it’s already known, and report it if it isn’t. We’ve also improved support for building and running on Linux systems without X11.
You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to MAME [link] [comments]

MAME 0.214

MAME 0.214

With the end of September almost here, it’s time to see what goodies MAME 0.214 delivers. This month, we’ve got support for five more Nintendo Game & Watch titles (Fire, Flagman, Helmet, Judge and Vermin), four Chinese computers from the 1980s, and three Motorola CPU evaluation kits. Cassette support has been added or fixed for a number of systems, the Dragon Speech Synthesis module has been emulated, and the Dragon Sound Extension module has been fixed. Acorn Archimedes video, sound and joystick support has been greatly improved.
On the arcade side, remaining issues in Capcom CPS-3 video emulation have been resolved and CD images have been upgraded to CHD version 5, Sega versus cabinet billboard support has been added to relevant games, and long-standing issues with music tempo in Data East games have been worked around.
Of course, you can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to MAME [link] [comments]

How to trade the news - 3 powerful strategies - YouTube Forex Factory training and strategies for trading Forex news trading strategy - How to PREDICT forex market ... HOW TO TRADE FOREX NEWS ( The Easy News Trading System ) FOREX 1 min News Trading Strategy How To Make Forex Factory An App

Forex News v.1.1 Forex News Software is advanced forex trading news tool which Updated in Real time with minute by minute Live market and data analysis to see how the currency pairs react to economic news over time. Latest Currency Fundamental and Technical Analysis. Real Time Forex News v.2.4 Real Time Forex News by eToro tool which Updated in Real time with Live market analysis to help you ... Forex Factory free download - The Games Factory, HD Video Converter Factory, Setup Factory, and many more programs Forex Factory's team is overflowing with passion for financial markets and internet technologies – both fields are at the heart of the company. With the experience of a Wall Street firm, and the technical expertise of a Silicon Valley startup, Forex Factory is able to develop unmatched products and experiences for traders. The company is poised to be one of the world's leading providers of ... Forex News Alert software for PocketPC 1 reply. Financial news software 0 replies. Trading Discussion / Reply to Thread; Subscribe ; News release software Post # 1; Quote; First Post: Feb 19, 2014 4:28pm Feb 19, 2014 4:28pm richhand Joined Feb 2012 Status: Member 145 Posts. I'm wondering what the fastest method is of gaining news figures, ie. in seconds rather than a 1 minute or 2 such ... Forex Factory News EA: Expert Advisor designed for news trading. The news are downloaded from the Forex Factory, Investing.com, myfxbook.com websites. Make sure to add the - English Forex News - the fastest breaking news, useful Forex analysis, and Forex industry news, submitted from quality Forex news sources around the world. Forex Factory is for professional foreign-exchange traders. Its mission is to keep traders connected to the markets, and to each other. Forex Factory is more than just a place to find new trading ... Forex Factory Forex Calendar And Forex News free download - Robot Forex 2013 Profesional, Forex All-In-One-Widget, Forex Ebooks-- Forex Analytic- Rss Forex News, and many more programs Forex News Trader support up to 5 advanced strategies that effective with news trading. The order controlling is very professional and absolute automated. Moreover, you can use it as a powerful tool to trade manually with those automated strategies. News release gives opportunity to have pips since the price usually has big move at that time. Now, with this tool, trading news becomes easier ...

[index] [14304] [2572] [8724] [22946] [13958] [27268] [27077] [21063] [3812] [14555]

How to trade the news - 3 powerful strategies - YouTube

WATCH: 🔥🔥Forex news trading strategy - How to determine forex market direction ahead of news release. Predicting forex news direction - best forex strategy, ... Streamed live on Jul 24, 2014 http://LearnToTradeWithTravis.com/ If you use forex factory or wish to then this training will show you have to set it up and u... All about Trading in Forex and Binary Option Marked. HOW TO TRADE FOREX NEWS ( No Fundamental - No Analysis needed) The Easy News Trading System ----- MUSIC: Track: Unknown Brain - Inspiration ... How to trade the news using 3 strategies. Economic news are released for the Forex, equities, commodities markets etc. This video describe how one can take a... How To Read Forex Factory and Investing.com Website Calendar News Data Tani Forex In Urdu And Hindi - Duration: 14:54. Tani Forex 10,932 views forex 1 h scalping,forex 1 hour strategy,forex 1 hour scalping system,forex scalping,forex scalping 5 minute, forex scalping system,forex scalping 1 minute,forex scalping techniques,forex scalping...

https://binaryoptiontrade.ubacinunwa.tk